Facility Testing Is a valuable tool to detect whether people are infected with COVID-19 even if they aren’t showing symptoms. This test, used as a monitoring tool, could identify areas and job tasks with potential exposure to COVID-19 to support other efforts to prevent outbreaks in your organization. As you resume operations, these test results can help you to adjust the level and type of operations to maintain safety. People transmit microbes to their surroundings from their hands and their breath. Every time someone coughs, talks, laughs, or sings, aerosols full of pathogens fill the air and eventually land on surrounding surfaces.
Where do people breathe? When people exhale, the particles in their breath land on the surfaces in front or below them. At CLO2 Sterilization Inc, and with help of our client we select surfaces people may touch, but definitely would breathe, talk, or cough towards. Examples might include Plexiglas dividers, elevator walls, monitors or screens, the front of display cases, even the floor. Consider also the wall near the HVAC air intake where particles in the air flow. COVID-19 Facility Report After sampling a facility for possibilities of having covid19 on their premises, a complete report will be submitted within 24 to 48 Hours following testing . Reports are totally private and prepared according to data taken for client needs and facilities. COVID-19 Facility Tests were not designed to test humans
Where do people touch? Select surfaces touched frequently by as many people as possible. Examples include keypads, handles, railings, faucets, light switches, counter or table tops, chair backs, menus or carts.
COVID-19 Facility Test Monitor your space for the virus that causes COVID-19 so you can take action to stop the spread
COVID-19 Facility Test can be used to monitor cleaning and disinfecting practices by sampling before and after the cleaning protocol is performed. Even if you are using EPA-approved disinfectants, not following the instructions correctly may result in ineffective disinfection outcomes, discoverable only by testing.
Test results indicate areas that appear to be cleaned effectively, where the virus was present before cleaning and absent after cleaning. Test results identifies hard to reach spots (e.g. at the top of a vending machine) that tested positive for presence of the virus, indicating that aerosolized virus is being dispersed within the building by diffusion and air turbulence. Test results indicate areas that persons who recently tested positive for COVID-19 had frequently touched or come into repeated contact with. Test results distinguished between otherwise identical environments, where one was occupied by a person infected with COVID-19 and the other was not.
At CLO2 Sterilization Inc, with your help we think through how people are using the space you plan to test. What is commonly touched? Where do people stand or sit for periods of time? Where are masks being worn and not being worn? Considering how people use your space will help you to select samples that deliver the most accurate assessment of your environment
Consider the behavior of people in your space
Facility Testing Is a valuable tool to detect whether people are infected with COVID-19 even if they aren’t showing symptoms. People transmit microbes to their surroundings from their hands and their breath. Every time someone coughs,talks, laughs, or sings, aerosols full of pathogens fill the air and eventually land on surrounding surfaces.
At CLO2 Sterilization Inc, with your help we think through how people are using the space you plan to test.  What is commonly touched? Where do people stand or sit for periods of time? Where are masks being worn and not being worn? Considering how people use your space will help us to select samples that deliver the most accurate assessment of your environment
Where do people breathe? When people exhale, the particles in their breath land on the surfaces in front of or below them. At CLO2 Sterilization Inc, and with help of our client, we select surfaces people may touch, but definitely would breathe, talk, or cough towards. Examples might include Plexiglas dividers, elevator walls, monitors or screens, the front of display cases, even the floor. Consider also the wall near the HVAC air intake (where particles in the air flow).
Where do people touch? Select surfaces touched frequently by as many people as possible. Examples include keypads, handles, railings, faucets, light switches, counter or table tops, chair backs, menus or carts.
COVID-19 Facility Test Monitor your space for the virus that causes COVID-19 so you can take action to stop the spread
Consider the behavior of people in your space
COVID-19 Facility Report After sampling a facility for possibilities of having covid19 on their premises, a complete report will be submitted within 24 to 48 Hours following testing . Report are totally private and prepared according to data taken for client needs and facilities. COVID-19 Facility Tests was not designed to test humans.
Test results indicate areas that appear to be cleaned effectively, where the virus was present before cleaning and absent after cleaning. Test results identifies hard to reach spots (e.g. at the top of a vending machine) that tested positive for presence of the virus, indicating that aerosolized virus is being dispersed within the building by diffusion and air turbulence. Test results indicate areas that persons who recently tested positive for COVID-19 had frequently touched or come into repeated contact with. Test results distinguished between otherwise identical environments, where one was occupied by a person infected with COVID-19 and the other was not.